Al Qudrah Switchgear IND L.L.C. · Emirates Industrial City, Sharjah
Al Qudrah Switchgear IND L.L.C.

LV switchgear and industrial automation since 2012

Reliable power distribution and control, engineered in the UAE.

We design and manufacture switchboards, distribution boards and PLC/SCADA control panels in Sharjah, and commission them on site.

3200 A
Main distribution boards type-tested by DEKRA to IEC 61439-2
65 kA
Short-circuit withstand for 3 seconds on tested designs
ISO
9001, 14001 and 45001 certified management systems
Grade 1
SEWA certified switchgear and capacitor bank assembler
Technician testing a contactor inside a control panel

Services

Engineering, programming and commissioning

We stay with the project after delivery. Our engineers install, program and commission every system we build, and support it after handover.

  • Single-line diagrams, load calculations and GA drawings
  • PLC/SCADA programming and system integration
  • Installation, testing and on-site commissioning
  • As-built documentation and after-sales support
Our services

Industries

Industries we serve

From hospitals to cement plants, every panel is engineered to the consultant’s specification and the authority’s requirements before it is built.

DHA Hospitality Care Center, Dubai Industrial City, supplied by Al Qudrah

Hospitals & medical centres

MDBs, SMDBs and ATS panels for hospitals and clinics where the supply cannot stop, such as Sheikh Khalifa Hospital in Umm Al Quwain and the Dubai Health Authority care center.

See our projects

Why Al Qudrah

Type-tested designs

Our assemblies are verified to IEC 61439-2 by ASTA (Intertek) and DEKRA.

In-house engineering

Design, drawings and bill of materials prepared by our own engineers.

Built in Sharjah

Delivery typically within two months of consultant and DEWA approval.

Factory-tested

Every panel is tested before dispatch and leaves with a signed factory test certificate.

Certificates and approvals

ISO-certified, type-tested to IEC 61439-2 and approved by the Sharjah authorities.

All certificates
ISO 9001:2015 — preview

ISO 9001:2015

Quality management · QRS

ASTA type test — preview

ASTA type test

2500 A MDB/MCC · Intertek

DEKRA type test — preview

DEKRA type test

3200 A MDB · IEC 61439-2

SEWA Certified Company — preview

SEWA Certified Company

Grade 1 · Switchgear assembler

Manufacturer partnerships

Authorized panel builder for the world’s leading brands

Each manufacturer has accredited us to assemble low-voltage switchboards with their genuine components, to IEC 61439.

See the certificates
  • Schneider ElectricGreen Partner Panel Builder

  • LegrandAuthorized Panel Builder

  • EatonRegistered Panel Builder · xEnergy

  • CHINTAuthorized Panel Builder · UAE

Selected clients and projects

Developers, government entities, brands and contractors we have supplied in the UAE and Saudi Arabia.

Project references
  • Expo 2020 Dubai
  • Ministry of Presidential Affairs
  • UAE Ministry of Education
  • Dubai Health Authority
  • Government of Sharjah
  • Sharjah Roads & Transport Authority
  • Dubai Civil Defence
  • University of Sharjah
  • Emaar
  • Arada
  • Masaar
  • Wafi Group
  • Bank of Sharjah
  • Sharjah Islamic Bank
  • Imdaad
  • GGICO
  • Shurooq
  • American University of Sharjah
  • Vida Dubai Mall
  • Al Zorah
  • McDonald’s
  • Burger King
  • Texas Chicken
  • Interplast
  • Al Hamra
  • Sharjah Directorate of Public Works
  • Dubai Fishermen Co-operative Association
  • Hadeed Metallic Industries
  • KSK Capital
  • Faisal Jassim Group
  • Emirates Stone Company
  • Al Serh Al Kabeer Construction
  • Tiger Contracting
  • TAB
  • Ramada General Contracting
  • Asian Falcon Engineering
  • Noor Masr Technical Services
  • Al Fahad Electrical & Sanitary Contracting
  • Noran Electrical & Sanitary Contracting
  • Riyadh Metro

Frequently asked questions

What consultants and contractors usually ask before they specify us.

Are your switchboards type-tested to IEC 61439?

Yes. Our main distribution board designs are design-verified to IEC 61439-2: a 2500 A MDB/MCC certified by Intertek ASTA, and 1600 A, 2500 A and 3200 A Legrand XL³ 4000 boards certified by DEKRA, with a short-circuit withstand of 65 kA for 3 seconds.

Are you approved by SEWA, and do you handle DEWA submittals?

Al Qudrah is a SEWA Certified Company, Grade 1, for switchgear assembly and capacitor banks, and a first-category registered supplier with Sharjah Public Works. We prepare the technical submittals for SEWA, and for DEWA on Dubai projects.

Which switchgear brands do you work with?

Schneider Electric, Legrand, Eaton, ABB, CHINT and LS Electric. We are an accredited panel builder for Schneider Electric, Legrand, Eaton and CHINT, so we can build to the brand your consultant specifies.

What is your delivery time?

Typically two months after the consultant and the authority (DEWA or SEWA) approve the drawings. The exact lead time depends on ratings and component availability.

Do you test panels before delivery?

Yes. Every panel is routine-tested to IEC 61439-2 in our Sharjah factory, including insulation resistance and a 2.5 kV dielectric test, and ships with a signed factory test certificate. Consultants and contractors are welcome to witness the tests.

Which forms of separation and IP ratings do you build?

Forms 1 to 4b, including Form 4b types 1 to 7, in enclosures from IP43 to IP54 depending on the design and location.

Where do you deliver?

From our factory in Emirates Industrial City, Sharjah, we supply projects across the UAE and have delivered panels to Saudi Arabia, Qatar, Bahrain, Kuwait, Oman, Jordan, Syria and Angola.

Planning a project?

Send us your single-line diagram or specification. Our engineers will reply with a technical offer and lead time.